Review of the TP-Link Deco W7200 Mesh Wi-Fi 6 System

The TP-Link W7200 is a two-piece mesh Wi-Fi system that is simple to set up and provides reliable throughput and signal coverage.


Wireless Specification802.11ax
AC SpeedAX3600
Number of Wired LAN Ports (Excluding WAN Port)One on the router, 2 on satellites
Number of USB ports0
Number of Bands3
Number of Antennas10
IPv6 CompatibleSure
Quality of Service (QoS)Sure
SecurityWPA3, WPA2
Parental ControlsSure
Anti-Malware ToolsSure
Coverage Area for Hardware as Tested5500 sq ft
Number of Nodes2
Wired BackhaulSure
Separate BandsNo
DD-WRT / Tomato-CompatibleNo

The TP-Link Deco W7200 ($229.99) is a two-piece mesh system that provides seamless Wi-Fi 6 networking to houses up to 5,500 square feet. It’s simple to set up, and it comes with TP-HomeShield Link’s network security and parental control software, just like the other Deco systems. It also did well in our throughput and signal strength testing, making it a good alternative for houses with three or more bedrooms. However, if you want better performance and more connectivity options, the Asus ZenWiFi XT8, our Editors’ Choice Wi-Fi 6 mesh system, will set you back another $200 or so.

No Artwork in These Decos…Simply Wi-Fi

The W7200 is made up of two identical cylinder-shaped nodes with a height of 6.7 inches and a width of 4.1 inches. They’re attractive, with a white finish and a black top, but they’re far more modern than Art Deco-inspired, in case you’re curious about the brand name.

Review of the TP-Link Deco W7200 Mesh Wi-Fi 6 System

On the front of the base, the nodes have a small LED indication that shines green while they’re connected, blinks blue during setup, and glows solid red when there’s a connectivity issue. Two gigabit LAN connections and a power jack are located on the back of the unit. A reset button can be found on the base. This system lacks the multi-gig connectivity that more expensive systems like the TP-Link Deco X90 and the Asus ZenWiFi AX provide (XT8). It also doesn’t have any USB ports.

The W7200 covers properties of as much as 5,500 sq. ft with two nodes, and it may be expanded by including any Deco part reminiscent of Deco X20 or Deco X60 nodes. It’s a tri-band AX3600 system that may attain most (theoretical) speeds of as much as 574Mbps on the two.4GHz band, 1,201Mbps on one 5GHz bar, and 1,802Mbps on the secondary 5GHz band. By default, it makes use of the 1,201Mbps 5GHz band solely for wi-fi backhaul however you’ll be able to free that up with a wired backhaul configuration should you join the nodes with an Ethernet cable.

Each node is equipped with five internal antennas and is powered by a 1.5GHz CPU. This is an 802.11ax Wi-Fi system with direct-to-client beamforming, WPA3 encryption, 3X3 MU-MIMO data streaming, and OFDMA packet transfers. It does not, however, offer 160MHz channel bandwidth, limiting it to a lower bandwidth than the most feature-rich Wi-Fi 6 routers, such as the ZenWiFi XT8.

The W7200 is controlled via a web-based console and employs the TP-Link Tether app for iOS and Android mobile devices. The mobile app launches to an Overview screen with an Internet icon and a list of online and offline devices that have connected to the network. To see a list of network nodes, their locations, and which clients are currently connected to each node, tap the Internet icon. You can allocate bandwidth priority and turn off access to any client from this screen.

Overview, HomeShield, and More buttons are located at the bottom of the screen. From anywhere in the app, the Overview button takes you back to the home screen. The HomeShield button brings up a page with network security tools and reports, as well as parental controls and QoS configuration options. The W7200 includes a free Basic version of HomeShield that allows you to run network security scans. To get DDoS protection, malicious content screening, and port incursion prevention, you’ll need to upgrade to the $5.99 per month Pro plan.

Create user profiles, apply age-based content restrictions, block websites, and halt the Internet for certain users with the Basic plan’s Parental Controls. However, the Pro plan is required to analyze individual traffic usage, establish time limits, and offer Time Rewards (additional online time) as rewards for chores or homework completion. You’ll also need the Pro plan to get detailed reports that show how long a user has been online, which websites they’ve visited, and which devices they’ve used to access the internet. Set bandwidth limitations and allocate bandwidth priority to individual clients using the QoS settings for 1, 2, or 4 hours at a time.

The More button brings up a panel with Wi-Fi, LAN, DHCP, and Port Forwarding settings. You may also use this page to build blocklists to prohibit specific devices from connecting to your network, utilize WPS to add devices to your network, update the firmware, and set up notifications to notify you when a new device connects.

Do It All within the Deco App

The W7200 system was simple and quick to set up. I downloaded the Deco app, set up an account, and tapped the Let’s Get Started button at the bottom of the first screen. From the list of Deco models, I chose the W7200 and followed the onscreen directions to turn off my modem, attach a Deco node to it, and then turn everything back on.

Review of the TP-Link Deco W7200 Mesh Wi-Fi 6 System

I double-checked that the node’s LED was glowing blue, then connected my phone to the node’s SSID and waited a few seconds for it to join. I named the node, chose the internet connection type, and named and passworded the new network. The network was built after around 20 seconds, then I tapped Next to add the second node. I just plugged in the node, and it was instantly connected to the network after two minutes. The installation was completed once I provided the node a name.

The W7200 turned in spectacular scores on our throughput efficiency exams. The router node’s rating of 771Mbps on the close-proximity (similar room) test was sooner than the Eero Pro 6 (701Mbps) and the TP-Link Deco X20 (654Mbps) however not almost as quick because of the Asus ZenWiFi XT8 router node (860Mbps). On the 30-foot test, the W7200 router managed 298Mbps, whereas the Eero Professional 6 and TP-Hyperlink Deco X20 delivered 230Mbps and 225Mbps, respectively. As soon as once more, the Asus ZenWiFi XT8 router led with a rating of 347Mbps.

The W7200 satellite node had similar results. It outperformed the Eero Pro 6 (455Mbps) and TP-Link Deco X20 (449Mbps) nodes in the close-proximity test, but fell short of the Asus ZenWiFi XT8 node (675Mbps). The W7200 node achieved 475Mbps at 30 feet, which is impressive when compared to the Eero Pro 6 (353Mbps) and the TP-Link Deco X20 (301Mbps). Despite this, the Asus ZenWiFi XT8 got first place with a score of 619Mbps.
We use an Ekahau Sidekick Wi-Fi diagnostic gadget and Ekahau’s Survey mobile app to build a heat map that shows coverage across our test home to determine wireless signal strength.
The strongest signal measurements are shown by darker green areas on the map, whereas lower signal readings are shown by lighter green and yellow areas. The circles indicate where the router and satellite node are located. The Deco W7200 system had no issue transmitting a relatively strong signal to all corners of our test home, as seen on the map.

Simple Set up, Slim Bandwidth

The TP-Link Deco W7200 Tri-Band Wi-Fi 6 Mesh system is a great option for spreading Wi-Fi from corner to corner in houses up to 5,500 square feet. It’s simple to set up and operate, and it can be expanded with any Deco node. It also has decent parental controls. In testing, both the router and the satellite node delivered remarkable throughput, and both components worked together to offer a strong signal throughout our test home.

It helps wi-fiWi-Fi 6 applied sciences, it doesn’t supply 160MHz channel bandwidth, and it lacks multi-gig and USB connectivity. For these options, you’ll need to look at our Editors’ Alternative decide, the Asus ZenWiFi XT8. It’s dearer; however it’s one of many quickest mesh programs we’ve examined, and it comes with sturdy lifetime parental controls and a router’s placement community safety software program. 

TP-Link Deco W7200 Mesh Wi-Fi 6 System
Editor’s choice
TP-Link Deco W7200 Mesh Wi-Fi 6 System
  • Simple to put in and handle
  • Robust throughput and sign efficiency
  • HomeShield safety software program included
  • No USB ports
  • Lacks multi-gig connectivity
  • Doesn’t assist 160MHz channel bandwidth

We also suggest

You may also like

Niamh Murphy, a writer who is always seeking new challenges and pushing the boundaries of what's possible with the written word. I believe that writing is not just about expressing oneself, but about taking risks and experimenting with different forms and styles. I strive to create work that is both innovative and thought-provoking, that pushes the limits of what's possible with the written word. I believe that writing has the power to change the world, and I am honored to be a part of that tradition.


Latest articles

Faster RAR5 compression is available with WinRAR 6.20

The WinRAR 6.20, recently released by RARLAB, is the...

Must Have WordPress Plugins for an eCommerce Site

WordPress has usually been the platform of selection for a lot of companies trying to begin constructing their very...

Review of the Best Spatulas for You

The spatula is a must-have kitchen utensil when it...

What is the difference between iPad Pro and regular iPad?

The iPad Pro and regular iPad are both popular...

Disclosure: Written and researched by the KEWIKI crew. We spotlight services and products you may discover fascinating. If you happen to purchase them, we could get a small share of the income from the sale from our companions. We could obtain merchandise freed from cost from producers to test. This doesn't drive our resolution as to whether a product is featured or beneficial. We function independently from our promoting group. We welcome your suggestions. Please e-mail us at [email protected] 


find out more!